As seen in Reef Hobbyist Magazine! Coral fragging has just gotten easier with the ReefKeeper™ saw. It is made to meet the specific needs of Reef Aquarists:
Reduced Heat Transfer Yields More Viable Frags Heat is the enemy when cutting corals; it destroys tissue and seriously affects viability, especially with sensitive species like chalice corals. The DFS-100 ReefKeeper Saw employs a continuously cooled narrow diamond blade to dramatically reduce heat transfer to the delicate tissue when cutting. Less heat means more viable frags can become healthy colonies to swap or sell.
Clearance to Handle Larger Specimens
Saw through materials as tall as 3 1/2" - something you can't do with cut-ff wheels, tile saws, or any other band saw. So go ahead, tackle that Tubastrea or Favites or any large specimen with confidence.
Narrow Cutting Path Rotary tools and tile saws plow a wide swath through your valuable stock. The narrow diamond blade of the DFS-100 ReefKeeper Saw is removing the least possible amount of material as it cuts, resulting in less waste—up to three times less!
Features Made specifically for fragging corals (see it in use).
Use on stony corals, soft corals, and live rock.
The stainless steel diamond coated blade won't contaminate your tank with copper.
Inexpensive, replaceable BladeSert™ blade guides make the most intricate cuts simple.
Sturdy molded work table won't corrode.
The upper blade guide is adjustable for varying material thickness.
The spring-loaded tension system, molded into the frame, insures proper wheel alignment, simple blade setup, perfect tracking hour after hour, and enhances blade life.
The motor is permanent magnet, high torque, with built in speed control.
The frame, cover, and water reservoir are molded entirely from structural grade thermoplastic making it corrosion resistant, extremely lightweight, portable, and easy to handle.
90 Day Full Confidence Warranty (see Extended Information)
Construction: Injection molded, structural grade thermoplastic
Motor: Permanent magnet, speed controlled, up to 2800 RPM
Torque: 48 oz.-in
Work surface: 9" x 10"
Size: 18" high x 10" deep x 13" wide
Weight: 9 pounds
Throat Depth: 4.75" (12 cm)
Cutting Depth: Up to 3.5" (8.9cm) thick
Minimum Radius: 3/16" (.5 cm)
Maximum Radius: 4.75" (12 cm)
The inexpensive Replaceable BladeSert™ (Inland no. 90012) is key to the life of your (more expensive) diamond blade (Inland no. 90007). The BladeSert™ will wear with saw use and the slot that the blade passes through will widen over time. Using a worn BladeSert™ allows for excess play in the blade and the blade becomes more likely to break. It is important to replace the BladeSert regularly. Inland 90 Day Warranty
This warranty is granted by INLAND CRAFT PRODUCTS, CO. for 90 days from the original date of purchase. If your Inland machine fails under appropriate use during the warranty period, Inland Craft will repair or replace it at our discretion. If you feel that this product is not performing properly and needs to be serviced, contact INLAND CRAFT for a Return Authorization Number: Inland Craft Products, Co. PH: (800) 521-8428